// SIMMER COMPETITION RACE
The 2021 SCR presents the most competitive racing sail out there, with less physical demanding performance. More control equals a higher top end speed.
The design objectives that Simmer Chief Sail Design, Tomas Persson and the R&D team set up was to improve the stability of the sail profile to effectively generate better acceleration and higher top end speed. This has been achieved by making the sleeve wider and improving the sails aerodynamics. The width of the sleeve gradually increases towards the larger sizes to generate the perfect blend of power delivery forward pull and balance. The result of the following improvements are a sail which is proven faster, planes earlier and delivers much better stability in overpowered conditions.
SX SUPERTUBE batten is a revolutionary development which creates a more precise controlled sail profile and radically improves the sail dynamics. Designed with the same technique as our top performing SX masts. The SX Supertube batten is designed to create the perfect harmonic curve. The progressive material lay up of the batten controls the stiffness throughout the curve, starting with a softer fiberglass rod in the front, leading into a fiberglass tube then gradually shifting into 50% carbon then a 100% carbon tubing in the back. With the SX SUPERTUBE batten we can lock the center of effort further back without loosing control over the stability.
VERTICAL SHAPING LUFF PANEL // Distributes the load inside of the cutline into a larger area of the sail when more downhaul is added, increasing durability and reducing stretch in this critical area of the sail. Adds stability and locks in the center of effort in the sail.
REDUCED WEIGHT // Reduced weight on panel layout and battens.
SPEED SPECIFIC SIZES // 5.0 are 5.4 speed specific sizes featuring 8 battens.
INCREASED TWIST // Increased twist around batten 4 and 5 to create a lower centre of effort.
MONOFILM BATTEN POCKETS // Radically reduces the weight.
RDM COMPATIBLE // The smaller sizes of the SCR work with a SX10 RDM. The lower three cambers need to be replaced from camber " Large" to Camber "Reduced".
- Reduced weight
- Monofilm battens
SX Supertube battens
- Four size specific cambers
- 5.0 and 5.4 are speed specific